[volunteergrid2-l] port help (was Re: New Members)

Fri Apr 6 04:39:38 UTC 2012

Ok...It seems to fix this for me also:

I have tub.port set and tub.location just to an IP
but when i set it to IP:PORT

i have only one node not appearing - miurr3-dmitriy.kazimirov at viorsan.com

Great :)

On Fri, Apr 6, 2012 at 06:55, erpo41 at gmail.com <erpo41 at gmail.com> wrote:

> I've noticed a couple of things right away:
>
> 1. Your tub.location contains a hostname but no port. According to the
> docs, a port is not mandatory, but...
>
> If you don't provide ``tub.location``, the node will try to figure out a
>    useful one by itself, by using tools like "``ifconfig``" to determine
> the
>    set of IP addresses on which it can be reached from nodes both near and
>    far.  It will also include the TCP port number on which it is listening
>    (either the one specified by ``tub.port``, or whichever port was
> assigned
>    by the kernel when ``tub.port`` is left unspecified).
>
> The way I read this documentation, the behavior of `tahoe` is defined
> when tub.location is not provided and when tub.location is set to
> something of the form ip_address:port. It does not explicitly say that
> it will use tub.port when tub.location contains only a hostname,
> although that sounds like a sane default behavior it is likely to
> employ.
>
> You may want to consider setting tub.location to
> masterme120.us.to:1027 and seeing what happens.
>
> Also, it appears you have set shares.total equal to shares.happy. I
> think I remember reading somewhere that a bug in tahoe can cause
> problems if H is not at least one or two less than N. Or, maybe that's
> not the case and I'm just tired.
>
> Thanks,
> Eric
>
>
> On Thu, Apr 5, 2012 at 9:37 PM, Benjamin <masterme120 at gmail.com> wrote:
> > Ok, here's my config file (minus the furls):
> > http://pastebin.com/sHnVAC0S
> >
> > I wasn't sure what the etiquette is for posting large files.
> >
> > On Fri, Apr 6, 2012 at 3:15 AM, erpo41 at gmail.com <erpo41 at gmail.com>
> wrote:
> >> It may be helpful to post the contents of your tahoe.cfg file (perhaps
> >> with the introducer furl redacted).
> >>
> >> On Thu, Apr 5, 2012 at 8:48 PM, Benjamin <masterme120 at gmail.com> wrote:
> >>> client.port says "1027"  The hardcoded limit is 1024.  Why would my
> >>> port be different for the two of you?
> >>>
> >>> On Fri, Apr 6, 2012 at 12:17 AM, Jody Harris <jharris at harrisdev.com>
> wrote:
> >>>> Verify what you're using port 1027 for. My node shows that Tahoe-LAFS
> >>>> is being directed to 75.49.9.181:59967
> >>>>
> >>>> You can verify your client port from .tahoe/client.port
> >>>>
> >>>> On Linux, only root can have access to ports below some hardcoded
> limit.
> >>>>
> >>>> jody
> >>>> ----
> >>>> Ph. 575-208-4567
> >>>> - Think carefully.
> >>>>
> >>>>
> >>>>
> >>>> On Thu, Apr 5, 2012 at 5:34 PM, Benjamin <masterme120 at gmail.com>
> wrote:
> >>>>> I'm using 1027 as my port, and a port scanner showed that it's open.
> >>>>>
> >>>>> On Thu, Apr 5, 2012 at 9:43 PM, Jody Harris <jharris at harrisdev.com>
> wrote:
> >>>>>> Does your DMZ expose ALL ports, or only those below 10000?
> >>>>>>
> >>>>>> That's all I've got. Sorry.
> >>>>>>
> >>>>>> jody
> >>>>>> ----
> >>>>>> Ph. 575-208-4567
> >>>>>> - Think carefully.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> On Thu, Apr 5, 2012 at 3:19 PM, Benjamin <masterme120 at gmail.com>
> wrote:
> >>>>>>>> ianchov at gmail.com
> >>>>>>>> steve.dodson at gmail.com-hiro
> >>>>>>>
> >>>>>>>> There is one node that is not connecting to anyone right now:
> >>>>>>>> miurr3-dmitriy.kazimirov at viorsan.com
> >>>>>>>
> >>>>>>> Those are the ones I can't connect to, but I'm in a DMZ, so I
> should
> >>>>>>> be reachable on any port.
> >>>>>>> _______________________________________________
> >>>>>>> volunteergrid2-l mailing list
> >>>>>>> volunteergrid2-l at tahoe-lafs.org
> >>>>>>> https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> >>>>>>> http://bigpig.org/twiki/bin/view/Main/WebHome
> >>>>>> _______________________________________________
> >>>>>> volunteergrid2-l mailing list
> >>>>>> volunteergrid2-l at tahoe-lafs.org
> >>>>>> https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> >>>>>> http://bigpig.org/twiki/bin/view/Main/WebHome
> >>>>> _______________________________________________
> >>>>> volunteergrid2-l mailing list
> >>>>> volunteergrid2-l at tahoe-lafs.org
> >>>>> https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> >>>>> http://bigpig.org/twiki/bin/view/Main/WebHome
> >>>> _______________________________________________
> >>>> volunteergrid2-l mailing list
> >>>> volunteergrid2-l at tahoe-lafs.org
> >>>> https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> >>>> http://bigpig.org/twiki/bin/view/Main/WebHome
> >>> _______________________________________________
> >>> volunteergrid2-l mailing list
> >>> volunteergrid2-l at tahoe-lafs.org
> >>> https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> >>> http://bigpig.org/twiki/bin/view/Main/WebHome
> >> _______________________________________________
> >> volunteergrid2-l mailing list
> >> volunteergrid2-l at tahoe-lafs.org
> >> https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> >> http://bigpig.org/twiki/bin/view/Main/WebHome
> > _______________________________________________
> > volunteergrid2-l mailing list
> > volunteergrid2-l at tahoe-lafs.org
> > https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> > http://bigpig.org/twiki/bin/view/Main/WebHome
> _______________________________________________
> volunteergrid2-l mailing list
> volunteergrid2-l at tahoe-lafs.org
> https://tahoe-lafs.org/cgi-bin/mailman/listinfo/volunteergrid2-l
> http://bigpig.org/twiki/bin/view/Main/WebHome
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://tahoe-lafs.org/cgi-bin/mailman/private/volunteergrid2-l/attachments/20120406/9b3da330/attachment-0001.html>