Additional Build/Install? Documentation

Hopefully, the basic install docs in ​docs/install.html are enough for the most common use cases. This page provides additional information for specific platforms.

Please feel free to add sections to this page with anything you might learn while building Tahoe on other platforms. Information which may be useful in the most general cases will be folded into docs/install.html .

Dependencies

The canonical list of dependencies and their versions is in _auto_deps.py. To see the current versions of those dependencies (plus a few others like the Python interpreter and the operating system) run tahoe --version.

This isn't a complete list of dependencies though, because some of those packages also have dependencies of their own. To see the complete list of all dependencies, run PYTHONPATH=${PYTHONPATH}:./support/lib/python2.5/site-packages/ python -c "import pkg_resources;print ', '.join([d.project_name+': '+d.version for d in set(pkg_resources.require('allmydata-tahoe'))])". An example output from that command is:

zope.interface: 3.5.0, simplejson: 2.0.7, pyutil: 1.3.30, zbase32: 1.1.1, allmydata-tahoe: 1.2.0-r3353, pyOpenSSL: 0.7, Twisted: 8.1.0-r25700, Nevow: 0.9.33-r17166, foolscap: 0.3.2, zfec: 1.4.2, pycryptopp: 0.5.12, argparse: 0.8.0, setuptools: 0.6c10dev

In addition to these, if you are installing on Microsoft Windows, then you need to manually install ​pywin32 before installing Tahoe.

Overview

Tahoe is happy to build and run in-place, from a source tree. It is not necessary to install it (outside the source tree) before use, but if you'd like to do so, please read the "Installing Outside The Source Tree" section below.

However, it does need to be "built" before running it in place. While Tahoe itself is pure-python and therefore does not require a distinct compile step, the mechanics that make it easy to run-in-place do require a setup phase. In addition, Tahoe uses several third-party python libraries to work its magic, many of which are unlikely to be just "lying around" and already installed. Several of these use compiled C code, so they do require a compile step.

The "make all" target will download and build any third-party libraries that are not already available on your system. It will also prepare the source tree for running-in-place. The details: this target is equivalent to executing "setup.py build_tahoe", and basically does a "setup.py develop" into a tree-local ./support/lib/python2.5/site-packages/ directory. The bin/tahoe executable knows that it should add this directory to PYTHONPATH before it does anything else.

After building, you can run the source tree's bin/tahoe script to create, configure, and use your new Tahoe node. As long as bin/tahoe is left inside the built source tree, it can be run from anywhere (even through a symlink). So until you delete the source tree, you can symlink ~/bin/tahoe to your source tree's bin/tahoe and then use it as you would any other system executable.

the "Desert Island" Build

Tahoe will download and install most of the libraries it requires when you run "make". You might want to pre-download these libraries: perhaps you are about to get on an airplane, or you anticipate having poor network connectivity, or you just don't like the idea of a so-called compile step using the network (the download step uses !PyPI to figure out where to download these libraries from, so you might be concerned that it or one of the project web pages it references has been modified to point at something malicious).

This disconnected-build operation is supported in two ways. When building from a darcs checkout, you can download the latest "tahoe-deps" bundle from ​http://allmydata.org/source/tahoe/deps/tahoe-deps.tar.gz . Unpack this in your source tree, and the build process will grab any necessary libraries from its tahoe-deps/ directory instead of downloading them from the internet. You can also unpack tahoe-deps into the parent directory to share it between multiple trees.

Alternatively, if you are building from a tarball (either a release tarball from ​http://allmydata.org/source/tahoe/releases/ , or a continually-generated current-trunk tarball from ​http://allmydata.org/source/tahoe/tarballs/ ), you can simply download the -SUMO version of the tarball instead of the regular one. The "SUMO" tarball includes the current tahoe-deps bundle pre-unpacked in the source tree.

The tahoe-deps bundle is updated every once in a while, as new versions of the dependent libraries are released, or as Tahoe becomes dependent upon new things. The ​http://allmydata.org/source/tahoe/deps/ directory contains historical ones, but there should never be a reason to use anything but the latest. The tahoe-deps bundle contains a README that has a version number.

Installing Outside The Source Tree

If you want to use Tahoe without keeping the source tree around, you will need to actually install it somewhere. You have several options.

Installing The Latest Release

"easy_install allmydata-tahoe", run from any system that has easy_install and setuptools installed, will download the latest release of Tahoe (and its dependencies, all found via PyPI), build everything, and install it into the standard place for python libraries on your system. On unix platforms this usually goes into /usr/lib/python2.5/site-packages/ and /usr/bin/tahoe .

On Debian or Ubuntu linux systems, you can install pre-compiled packages by adding the allmydata.org APT repository to your /etc/apt/sources.list and installing the "allmydata-tahoe" package. See DownloadDebianPackages for details.

Windows users can use an installer, which also provides the ​AllMyData backup client, and a SMB/winfuse -based frontend. These installers can be downloaded from (TODO: they're built, but where are they downloadable?).

Mac users can use a .dmg file (also an installer?), which provides a simple GUI app to launch the tahoe node. These can be downloaded from (TODO: same problem).

Installing From A Source Tree

These commands will take the current source tree and install its contents somewhere else on your system. This is the traditional meaning of "install".

The "setup.py install" target will install Tahoe (but not its dependencies) into the standard place for python libraries on your system: on Unix platforms this usually goes into /usr/lib/python2.5/site-packages/ and /usr/bin/tahoe .

The "make install" target is a wrapper around "setup.py install" that uses --single-version-externally-managed to bypass the extra checking that setuptools does. This allows "make install" to work the same way as traditional unix software (via GNU autoconf, etc).

("make install PREFIX=/usr/local" does not currently work -- see #703.)

TODO: There should be some way to use "setup.py easy_install" to install Tahoe and its dependencies into the system somewhere, but I haven't been able to figure out how.

Creating a binary distribution From A Source Tree

These commands will take the current source tree and create a single-file installer (or some other form of binary distribution). The installer-like-thing can then be moved to some other system and installed there.

The "setup.py bdist_egg" command will create a single-file .egg in the dist/ directory, which can be manually copied onto your PYTHONPATH somewhere. The .egg will declare its dependencies, but will not include them: you must arrange for them to be installed before the .egg will be usable.

The "make deb-PLATFORM-head" target (i.e. make deb-hardy-head) will create a debian package with the current tree's Tahoe code. This .deb file will be placed in the parent directory. The debian package will declare dependencies on the other libraries that it needs (like foolscap and zfec), but it will not include any code from them. The allmydata.org APT repository (see DownloadDebianPackages for details) has packages for the dependencies that aren't already in Debian proper.

The "make windows-exe" and "make windows-installer" commands will create a windows executable, and the corresponding installer.

The "make mac-exe" and "make mac-dist" commands will create a Macintosh OS-X executable and the corresponding installer (.dmg) file.

Platform-specific Notes

Debian/Ubuntu?

Tahoe is primarily developed on Debian/Ubuntu? machines. You can either build from source (as described by this page), or download pre-compiled debian packages for several distributions. See the DownloadDebianPackages page for details.

Windows

The following procedure will install and run Tahoe on Windows. Note that this assumes that you install Python in the default location (C:\Python26), if you choose another location you'll need to adjust the instructions below:

1. Download and install Python 2.6.2 from ​http://www.python.org/ftp/python/2.6.2/python-2.6.2.msi.

2. Download and install pywin32 from ​http://sourceforge.net/projects/pywin32/files/pywin32/Build%20214/pywin32-214.win32-py2.6.exe/download.

3. Download the latest Tahoe snapshot from ​http://allmydata.org/source/tahoe/snapshots/. Unpack it in a convenient place, such as C:\tahoe.

4. Open a command prompt and cd to the top of the Tahoe tree (e.g. cd \tahoe).

5. Run "C:\Python26\python setup.py build". Wait a bit until it stops working. Note that you need a working network connection because it will download various dependencies. Ignore any warnings referring to darcs.

6. Run "C:\Python26\python setup.py install". Wait a bit until it stops working. Again, you may need a working network connection.

7. Run "C:\Python26\Scripts\tahoe create-client --basedir C:\tahoebase". Choose an appropriate base directory.

8. Run "notepad C:\tahoebase\tahoe.cfg" to edit your config file. After "introducer.furl = ", paste in the FURL of the introducer for the grid you want to connect to. The test grid FURL is pb://todjw7qkb4dgq4fkeo7cqydcu5vneioh@tahoecs2.allmydata.com:52106/introducer .

9. Run "C:\Python26\Scripts\tahoe start --basedir C:\taboebase". Your node will start running and connect to the grid. The Windows firewall may ask whether or not to allow python to make network connections. Say yes.

What if that doesn't work?

If the build or install steps result in an error that says a compiler is needed, install the MinGW C/C++ compiler as follows:

1. Download and install MinGW from ​http://sourceforge.net/projects/mingw/files/Automated%20MinGW%20Installer/MinGW%205.1.4/MinGW-5.1.4.exe/download. The installer will prompt you for what components to install. You need the base components plus g++.

2. Configure distutils to use MinGW. To configure distutils to use mingw32, create a file called "distutils.cfg" in C:\Python26\lib\distutils, and put in that file:

[build]
compiler=mingw32

3. Add the MinGW binary path to your Path variable. To do that, go to the control panel (classic view), and double-click "System". Click on the "Advanced" tab (for Vista, click the "Advanced system settings" link on the left and accept the elevation prompt), then click the "Environment Variables" button. Scroll down to the "Path" variable in the "System Variables" list, double-click it, append ";C:\MinGW\bin" to the path, and "OK" out of all the dialogs. If you installed MinGW in some place other than C:\MinGW, adjust the path appropriately.

After installing the compilers, repeat the above instructions from step 4 (using a new command prompt to make sure that the environment variable setting has taken effect).

If you prefer to use Python 2.5, you must install a 2.5 build of pywin32 and also install OpenSSL or Tahoe will fail to run with an error about being unable to find ssl.dll. To install OpenSSL:

1. Download and install the Visual Studio 2008 redistributables from ​http://www.microsoft.com/downloads/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en. This is needed for OpenSSL.

2. Download and install OpenSSL v.9.8k Light from ​http://www.slproweb.com/products/Win32OpenSSL.html.

How do I make it run as a Windows service?

​http://agiletesting.blogspot.com/2005/09/running-python-script-as-windows.html